Manufactured with 20cm height dropstitch, these inflatable yacht docks provide a rigid ground perfect for a floating base at a favourite swim spot, a temporary dock for a stylish beach landing or simply as a fashionable extension to your yacht so everyone has room to sunbathe and enjoy the water.
ENGINEERING,DESIGN AND INNOVATION
The inflatable yacht docks is the tough, stable,light weight and soft underfoot. It inflates within minutes and work beautifully as stand-alone yacht docks or joined together in limitless configurations with our connection system. The surface covered with soft and yacht deck looking EVA foam, On the bottom , there are 4 built-in water bags function as anchors when they fill in water. This design will reduce drifting and increase stability.
Materials Made from 200mm PVC drop stitch with Mehler German PVC borders and ballast bags. Mehler known for their superior quality PVC, offers a trusted alternative to Hypalon.
INFLATABLE YACHT DOCKS ASSEMBLY INSTRUCTIONS:
Assembly and operation of this product requires two or more people and must be performed on dry land, before deploying on water.
1.Carefully unroll your Inflatable Platforms. If assembling ,set aside the connect pole if it isn’t needed for your application.
2.Spread out the product to its actual size. Make sure you have a large enough space to inflate the product. Caution: Do not inflate in winds exceeding 10 kts(19kph)or near obstructions or hazards, including sharp objects.
3.Plug in the included air pump. Locate the vale on the side of the product and fasten the hose from the pump to the valve. Please note,you need to utilize a high-volume air pump (sucn as the one included with your purchase) to inflate a product of this size. Refer to the specific instructions below on inflation.When you are done inflating the proouct it should be firm to the touch and it should not be easy to press in on the product.
4.Once product inflation is complete, it may be carried to the water. It will ake several people to lift and carry the product. Do not attempt to lift this product by yourself. Do not drag across any land surface.
5.Lower the Dockinto the water, ensuring that the four water bags (located on thebottom of the product) are expanded and that they fill with water. This will reduce drifting and increase stability.
Inflate&Deflate Instructions:
Caution: NEVER use an air compressor to inflate your Inflatable Platforms. This may cause the product to burst. Excessive high pressure during inflation can damage the product and may void the warranty. This product is equipped with a Quick Inflate Valve:
1.To inflate, push down valve centre turn unlockwise (valve will remain in).
2.Affix the correct hose fitting to your high efficiency electricair pump.
3.Carefully insert the fitting to the valve.
4.Turn urn clockwise to lock in place.Inflate until firm.
5.To deflate, push down vave centre turn anticlockwise of a turn (valve centre wil remain out).Le the dock deflate.
6.Roll up raft (NEVER fold) to remove the remaining air and store. Leave valve out so that the Inflatable Platforms can breathe whilst stored
Monitoring & Maintaining Proper Inflation AIR VALVE
To prevent serious damage to product, aways inflate fully to 3.2psi. Proper inflation will make the raft firm and rigid. An over inflation vave is fitted to protect your inflatable yacht docks from over inflating and causing damage. It will release air when the maximum air pressure is achieved. You will need to add air if exposure to cool air or cool water lowers the internal airpressure.
